Doov's PROJECTS
  • Home
  • About
  • Projects

1975 Norton - Wheels and Forks

9/6/2014

0 Comments

 
Several months after the frame was done, I stared in on the wheels. I wanted to replace the rims with shouldered alloy rims and SS spokes. I also wanted to learn how to lace a wheel. So I ordered everything from Buchannans. 

My first step was to measure the wheel offsets which I documented here rim-offsets-75-norton-commando.html .

​Once I knew that I pulled the hubs, rebuilt them and laced up the new rims. Here was my quick and dirty method to measure the offset when I was building them. I used the flats on the hub center as a reference. 
Holding the straight edge against the hub
Measuring Offset
Next up was the forks. I chose to go with the Lansdowne upgrade from Madass www.tritonmotorcycleparts.com/(I did this on another bike and really liked them).
Gorgeous
Parts collected, polished and ready to go
Assembled!
Lock installed
0 Comments



Leave a Reply.

    Categories

    All
    1975 Norton Rebuild
    1977 BMW R100S
    CNC
    Data Driven Sculpture
    Fadal
    Fadal VH 65
    Microcontrollers
    Miscellaneous
    Motorcycles
    Networking
    Norton Commando
    Renishaw Probes
    Sensors
    Shop
    Winnebago Revel

    Archives

    February 2022
    February 2021
    November 2020
    October 2020
    April 2020
    January 2020
    September 2019
    June 2019
    May 2019
    March 2019
    August 2018
    September 2017
    October 2016
    August 2016
    May 2016
    January 2016
    December 2015
    November 2015
    February 2015
    October 2014
    September 2014
    August 2014
    May 2014
    September 2010

Proudly powered by Weebly
  • Home
  • About
  • Projects