Doov's PROJECTS
  • Home
  • About
  • Projects

Water Filter

11/16/2020

0 Comments

 
I wanted to use the built in water tank for all our water needs - instead of carrying around 5 gallons for drinking, etc.  In order to do that, I felt it would be important to add an inline water filter for the galley sink. Although we filter the water when we fill, the water quality varies and more filtering is better. 

I went with an Everpure ADC filter - it got good reviews, is built well, has good specs, and seemed like it  would fit. I found examples on FB for installing in a Revel, but they were for earlier models with a different cabinet layout. They wouldn't work in the 2021.

I found a spot behind the lower drawer that works, but you have to mount to the wood panel located behind. This panel is only 1/2" thick and the filter is kinda heavy - esp with water. I decided to make a bracket to secure the lower portion and provide additional support.  I cut about 12" off the cold line and attached that to the filter inlet. I got a 20" braided faucet line to hook the outlet up to the cold on the faucet.
It just fits! 
Picture
0 Comments



Leave a Reply.

    Categories

    All
    1975 Norton Rebuild
    1977 BMW R100S
    CNC
    Data Driven Sculpture
    Fadal
    Fadal VH 65
    Microcontrollers
    Miscellaneous
    Motorcycles
    Networking
    Norton Commando
    Renishaw Probes
    Sensors
    Shop
    Winnebago Revel

    Archives

    February 2022
    February 2021
    November 2020
    October 2020
    April 2020
    January 2020
    September 2019
    June 2019
    May 2019
    March 2019
    August 2018
    September 2017
    October 2016
    August 2016
    May 2016
    January 2016
    December 2015
    November 2015
    February 2015
    October 2014
    September 2014
    August 2014
    May 2014
    September 2010

Proudly powered by Weebly
  • Home
  • About
  • Projects